Stenter Setting Machine

Product Detail

stenter setting machine

Machine Mainly Structure

Infeed Frame: E+Linfra red centering device.

Horizontal padder:

Rubber roller 315mm. Imported material made. 

Liquid tough is SS 304 made.

body wall is 25mm thickness. 

Cylinder is Taiwan brand,pressure is adjustable and Max is 8tons.

Driven device motor is 11kw. 

Auto Weft straightner: E+Lbrand.  

Machine head

Two fabrics guide roller,each equips 1.5kw gear reducer motor.

Edge tracing E+L brand.

Two fingers Edge spreading,E+L brand

Overfeeding device: Overfeeding rate:20%~+50% ,Lenze motor driven

Hot air chambers

Insulated wall is 150mm thickness. 

Two sets 7.5kw motor driven each chamber.

Electric motor is “SIOEMENS” ,

Nozzle thickness 0.8mm,zinc plate.

exhaust blower two sets,each is 5.5KW ,Blower motor is: Siemens

Rail pin plates ,Rail each side is 11sections,thickness is 6mm steel plate. Has been heat treatment. 

Chain oil maintain is about more than 8000hours.

Driven motor is 11kw,two sets. 

Chain driven motor is Lenz of Germany.

Width adjust device

Totally 11sets,driven seperately,each driven by 0.75kw motor. 

Coolanty system

Coolant driven motor is 5.5KW?

Rolling and plaiting deivce 

Plaiting range:900~1100mm

Rolling Max diameter is 500mm 

Support belt. 

Blender jar

Two sets blender jar,made by stainless steel.

Heating system

Heat exchanger:8sets

Electric valve:8sets.  

PT100heat resistant components:8sets.

Temperature controller:8sets

Pneumatic system 

Centering device

Paddering pressing up

Padder liquid discharge

Padder liquid add in

Tension control

Wool brush up and down

Chains tighting

Electric system 

Electric cabinets, equips two sets industry air conditioning.

Driven inverter?PLC and touching screen: Siemens brand

motor inverter:Siemens brand

Low voltage: Simens brand

Mainly equips:

1 Slam infra-red centering device 

2 Padder mangle 

3 Auto Electric weft straightner

4 Weft correction device

5 Width spreading device 

6 Edge spreading device

7 Overfeeing pin on device 

8 Auto edge tracing device

9 Pin plate chains

10 Rail way

11 Width adjust device

12 Steam box 

13 Heat setting chamber

14 Plaiter device

15 Dust exhaust system

16 Electric cabinet

Our factory manufacture the following dyeing finishing machines:

Stenter,relax dryer,open width compactor,tubular compactor,heat setting machine,balloon padder,felt calender ,slitting machine and so on.

Our machines have been exported to more than 30 countries. We have agent in Chile,Pillippines,other countries and regions,we are looking for agents as well.

We have good after sale service and we will support you all the time.

After sale service: in time,steady and reliable:

1.If customer needs to install the machine by us,we will dispatch our engineer to commission the machine and train the operators. 

2.Machine warranty period is one year,within one year,all parts broken are free of charge,after one year,all parts will be charged in cost.

3.Machine after sale service will be entirely lifespan,if faulty happens,we will react within 8 hours(working time) once receive the message from customer.

4.If machine has problem,firstly will communciate through email,video or telephone,if can not solve the problem,We will  offer on-spot service. customer should afford round tickets and salary USD100 per day. 

5.If customer meets processing difficulties,we can offer instructure and solution freely,if customer can afford charges,we can go to the spot to give assistant and help.

6. Establish customer file,warn customer to replace the spare parts in time.