Textile Stenter Machine

Product Detail

Stenter machine

Usage of the machine:

This machine series are used for fabric-stabilized finish and heat setting for cotton and it blends. 

Process flow: 

Two roller expander-slat centering—two bowl padder—auto weft straighter—lower overfeeding—expanding—upper overfeeding—tooth plate edge expanding—brush wheel overfeeding pining on---glumming—setting-coolant air-plaiter

Main specification :

1?Working width (pin plate distance): 700~2400mm

2?Mechnical speed: 8~80m/min

3?Wool brush wheel overfeeding rate: -20%~+50%

4?Chambers : eight chambers

5?Chambers working temperaturer: 100~220?

6?Chains run mode:  horizontal leve run,right left double driven     

7?Guide rail and chains mode: none oil lubrication

8?Fabrics clamp mode: Pin plate+anti pin off clip

9?Heating method : thermal oil

10?Normal working consumption : 700000~1000000kcal/hour(eight chambers)

11?working width control mode:11 section indivial control(eight chambers)

12?Total power : 225KW

13?Normal working electric consumption : 120~150 KW

14?Chamber air delivery mode:upper and lower air chamber individual control air volume   

15?Machine dimension(LXWXH): L=44760mm

W=5120mm

H=3000mm

16?Machine total weight:about 42tons

Machine Mainly Structure

Infeed Frame: E+Linfra red centering device.

Horizontal padder:

Rubber roller 315mm. Imported material made. 

Liquid tough is SS 304 made.

body wall is 25mm thickness. 

Cylinder is Taiwan brand,pressure is adjustable and Max is 8tons.

Driven device motor is 11kw. 

Auto Weft straightner: E+Lbrand.  

Machine head

Two fabrics guide roller,each equips 1.5kw gear reducer motor.

Edge tracing E+L brand.

Two fingers Edge spreading,E+L brand

Overfeeding device: Overfeeding rate:20%~+50% ,Lenze motor driven

Hot air chambers

Insulated wall is 150mm thickness. 

Two sets 7.5kw motor driven each chamber.

Electric motor is “SIOEMENS” ,

Nozzle thickness 0.8mm,zinc plate.

exhaust blower two sets,each is 5.5KW ,Blower motor is: Siemens

Rail pin plates ,Rail each side is 11sections,thickness is 6mm steel plate. Has been heat treatment. 

Chain oil maintain is about more than 8000hours.

Driven motor is 11kw,two sets. 

Chain driven motor is Lenz of Germany.

Width adjust device

Totally 11sets,driven seperately,each driven by 0.75kw motor. 

Coolanty system

Coolant driven motor is 5.5KW?

Rolling and plaiting deivce 

Plaiting range:900~1100mm

Rolling Max diameter is 500mm 

Support belt.

Blender jar

Two sets blender jar,made by stainless steel.

Heating system

Heat exchanger:8sets

Electric valve:8sets.  

PT100heat resistant components:8sets.

Temperature controller:8sets

Pneumatic system

Centering device

Paddering pressing up

Padder liquid discharge

Padder liquid add in

Tension control

Wool brush up and down

Chains tighting

Electric system

Electric cabinets, equips two sets industry air conditioning.

Driven inverter?PLC and touching screen: Siemens brand

motor inverter:Siemens brand

Low voltage: Simens brand

ric system

Electric cabinets, equips two sets industry air conditioning.

Driven inverter?PLC and touching screen: Siemens brand

motor inverter:Siemens brand

Low voltage: Simens brand